CALL US: 1300 369 858

The BIRRUS 'ULTRAMAT' is our Flagship product and is constructed from alternate treads of aluminium and carpet running across the doorway. It is ideal for interior or exterior applications with the appropriate type of textured insert that is selected. The carpet treads are securely held within extruded aluminium retaining sections which are lightly furrowed on the exposed surface to produce a non-skid surface.

"Green Ultramat" – Birrus Matting Systems are conscious of the eco and health aspects of our product and its manufacturing process and as such can now offer our customers a Greentag GreenRate Certified Ultramat.

We hope that our efforts to develop and sell products that achieve a less negative environmental and health impact are recognised and utilised within the design, construction and development industries we service. Click here to see our certification details.

ULTRAMAT is available in 10mm Open Construction Slimline. It is also available in 10mm & 16mm Closed Construction.

An Open Construction Slimline aluminium extrusion system is linked with a perforated joining strip to allow for drainage. They are best suited to exterior applications where provisions have been made for drainage in the matwell. Anodising of aluminium sections in selected colours can be arranged. Note: Anodising is a coating which will, in time, wear with surface contact. Refer to specification form for more details.

Ontera Cut Pile

View the embedded image gallery online at:
View the embedded image gallery online at:
Limited range of below colours available
View the embedded image gallery online at:

  • Carpet Tech Specs:
  • Installation:
    Birrus Matting Systems require and internal recess depth of 12mm or 20mm. Standard Birrus matwell frames are fabricated using aluminium alloy, brass and stainless steel angle for compatibility with our mats.

    Place framing in the recess, and set angles level with adjoining floor surfaces. Grout in or screw fix as required. Contractors are advised, to ensure proper performance of the entire assembly it is absolutely necessary that base of matwell is formed to a level plane.
  • Care and Maintenance:
    Vacuum clean matting regularly and if required spot clean carpet inserts with dry shampoo, or steam clean as required.

    Replacement of inserts is a simple job carried out insitu. A full range of inserts is available from your local distributor.

    Restore lustre to ribbed aluminium sections by lightly rubbing over with abrasive wool.
Copyright Birrus Matting Systems - Website created by Community Genius